System 10, the alternative with modern insulation
ISOFLECT SYSTEM 10 packages are a complete ecosystem of materials with significantly superior performance compared to all other classic products currently in use.
ISOFLECT SYSTEM 10 ensures thermal performance much superior to systems with classic products.
|
ISOFLECT SYSTEM 10 package (total thickness
WOOL) |
Thermal resistance R value (must be as high as possible). Values > 7.5 M2/MK already correspond to Passive Houses | Required thickness (cm) of mineral wool ( λ = 0.038 W/MK2) | Required blown fiber thickness ( λ = 0.038 W/MK2) | Required thickness (cm) open cell polyurethane foam ( λ = 0.038 W/MK2) |
| Basic (10 cm) | 5,082 | 19 | 19 | 19 |
| Basic (15 cm) | 6,397 | 23 | 23 | 23 |
| Basic + (10 cm) | 5,307 | 20 | 20 | 20 |
| Basic + (15 cm) | 6,623 | 24 | 24 | 24 |
| Medium (10 cm) | 5,686 | 22 | 22 | 22 |
| Medium (15 cm) | 7,001 | 25 | 25 | 25 |
| Medium + (10 cm) | 5,911 | 23 | 23 | 23 |
| Medium + (15 cm) | 7,227 | 27 | 27 | 27 |
| Premium (10 cm) | 5,986 | 24 | 24 | 24 |
| Premium (15 cm) | 7,301 | 28 | 28 | 28 |
| Premium + (10 cm) | 6,211 | 23 | 23 | 23 |
| Premium + (15 cm) | 7,527 | 29 | 29 | 29 |
ISOFLECT SYSTEM 10 packages are the new reference in the field of thermal insulation performed indoors, in applications such as: attics and lofts , roofs , partition walls , floors between floors , floors , ceilings and perimeter walls , plus many others .
If we talk about the need to achieve thermal performance values, the costs of ISOFLECT SYSTEM 10 are lower than classic systems because it eliminates many other materials, labor, cost of materials necessary to achieve the objectives and recovers useful space, space given by more flexible and lighter structures.
How do you order?
- You choose the right ISOFLECT SYSTEM 10 package.
- Measure the distances between the rafters. If the craftsmen knew how to leave the standard distances (58-59 cm), buy WOLLE in normal board (0.61 x 120 cm), both for 10 cm and 5 cm thickness. If you did not have skilled craftsmen, and the distances between the rafters are random, then we recommend that you buy the Jumbo board (133 x 285 cm) to cut it in the transverse direction to the width you need. This will eliminate a lot of material waste. For 5 cm thicknesses, you can order any type from the roll, and you will also do the cutting in the transverse direction.
- If you have the Basic or Basic + package, you will install a GOLD layer and a MULTILAYER
- If you have any other package than Basic, Basic + or RenoFit, you will install one layer of GOLD and three MULTILAYER
- For every 20 sq m you also need a roll of POWER TAPE
What do ISOFLECT SYSTEM 10 thermal insulation packages consist of? We will list the products according to the order of installation.
- ROOF PRO or ROOF ECO
- WOLLE thermal insulation wool
- Thermal insulation membranes in Phase 1 (directly on the structure): GOLD and MULTISTRAT
- MULTILAYER membrane from Phase 2 (before cladding).
- Sealing of joints is done with POWER TAPE .
The major differences between the products that are part of the System 10 packages and the other materials on the market.
1. ROOF PRO and ROOF ECO diffusion membranes compared to classic foils used on roofs.
| Characteristic | ROOF PRO | ECO ROOF | Other foils |
| Solar radiation rejection | 96% | 82% | 0% |
| UV exposure (days) | >120 | >90 | >0-7 |
| Internal temperature difference (compared to classic foils) | < 14 °C | < 10 °C | zero |
| Category | Premium | Premium | Low cost |
| Efficiency in thermal protection in summer | great | average | zero |
| Protection in the event of a fire originating from outside | good (aluminum withstands < 580 °C) | zero | zero |
| Sealing with own adhesive tapes | Yes | Yes | not |
| Aging effect | zero | low | great |
| Mechanical resistance | Very large | Very large | Low |
2. WOLLE thermal insulation wool. It is a product that replaces any other volumetric insulation dip (mounted between the rafters).
The entire list of beneficial features you get when you install WOLLE
WOLLE is a state-of-the-art insulation that combines all the elements necessary for superior insulation, performed inside the house.
Extremely important to remember before deciding which volumetric insulation to use:
a. For health:
- No insulation you take with you into your home (installed indoors, in attics, perimeter and partition walls, floors, ceilings, subfloors, etc.) must emit any kind of volatile organic substances. The only product that ensures 100% compliance with this requirement is WOLLE .
- Resistance to mold. Lowest possible water retention and passive ventilation capacity. These two requirements are 100% met by WOLLE insulation wool.
b. Indefinite term performance, volumetric and dimensional stability:
- WOLLE does not lose its performance because the manufacturing technology is correlated with this requirement and does not use any chemical substances. The chemicals contained in all other types of volumetric insulations such as binders, hydrophobic treatments, fire or insect treatments evaporate over time and cause the abrupt degradation of the insulation performance, generating voids, subsidence, collapse and others, which generates thermal bridges, mold, high energy consumption, reduced comfort and ultimately, the need for premature renovation of the house due to the insulation.
- In addition, WOLLE adheres excellently to surfaces and has extreme mechanical strength characteristics, combined with flexibility and low weight, which ensures volumetric and dimensional stability over an unlimited period. This also results in zero risk of thermal bridges due to collapse and settlement of the volumetric insulation.
- Choose WOLLE and protect yourself from all these problems.
c. Simple and extremely fast assembly, size variants that optimize time, consumption and material losses in any project.
- The variants in the entire range of widths and lengths, with standard thicknesses of 5 and 10 cm, ensure excellent optimization on the two main axes in this regard: easy and quick assembly + optimization of consumption by eliminating or reducing material losses.
- In addition, WOLLE insulation no longer drives away workers from the construction site, and if you have a minimum of technical inclination, you can install it yourself. Why? It does not sting, does not cause itching and irritation, and does not affect your health.
- When insulating wooden structures WOLLE does not require anchoring with fastening/hanging systems, which greatly increases the speed of installation.
- Where the structure builders did not know how to leave the standard distances between the rafters, you must choose the following versions:
- For 10 cm thickness: Jumbo variants (133 x 285 cm boards), to cut them in the transverse direction on the widths you have between the rafters/profiles/uprights.
- For 5 cm thickness: any of the roll variants with a width of 0.8, 1.0, 1.2 or 1.5 m. Cutting is also done in the transverse direction.
- Where the distances between the rafters are no more than 4 cm smaller than the width of a board, it can be forced in, and the edges are curved to avoid "bulging". Details in this video.
After you have finished assembling WOLLE in the desired thickness, you will begin installing the thermal insulation membranes in Installation Phase 1. Installation Phase 1, i.e. on rafters/beams/studs.
What to do first? Choose your insulation package. System 10 contains packages at different performance levels and all price ranges, to help you enjoy all the benefits regardless of your budget.
Each of the packages contains the full range of volumetric insulation thicknesses of 10, 15, 20, 25, 30 and 35 cm. The RenoFit package (insulation of walls and ceilings on the inside, heels) also uses 5 cm thick WOLLE .
About ISOFLECT SYSTEM 10 complete packages
Multi-function vapor barriers, GOLD and MULTISTRAT
Both GOLD and MULTISTRAT are membranes with multiple functions: they control vapors and humidity, they thermally insulate the spectrum of thermal radiation with aluminum foils, the spectrum of conductivity with sealed air layers and the spectrum of convection with the structure of each product. The two membranes effectively complement the qualities of the other products, integral components in the ISOFLECT SYSTEM 10 thermal insulation packages.
Why is this not the best choice, but the only choice?
| Characteristic | GOLD & multilayer | Foils with variable SD | Other types of vapor barriers |
| Thermally insulates | Yes | Not | Not |
| Aging effect | Not | Yes | Yes |
| Aging period (years) | > 250 | 3-10 | 3-10 |
| Soundproofing | Yes | Not | Not |
| Allows penetration of chemicals from volumetric insulation layers other than WOLLE | Limited, due to imperfections from sealing the layers | Yes, naturally, through the holes with variable SD | After aging, because the material becomes porous and no longer fulfills its vapor barrier function. |
Details about the installation of membranes in Phase 1 and Phase 2, respectively.
- Choosing a selection results in a full page refresh.